عربة نفعية قلابة Iveco Daily 70C18 2×4 ديزل أورو 6 رافعة جديد
عاجل- 16 كلم
- 7 طن
- 16/07/2026
- Gdańsk
- Iveco أورو 6
- Iveco
|
معلومات رئيسية
|
|
|---|---|
| مرجع الموقع: | 10664437 |
| هيكل العربة | عربة نفعية قلابة |
| العلامة التجارية | Iveco |
| السلسلة (العلامة التجارية : Iveco) | Daily |
| الطراز | 70C18 |
| الحالة | جديد |
| تاريخ التسجيل الأول للعربة | 16/07/2026 |
| البلد | بولونيا |
| صانع | Iveco |
حالة الأجهزة |
|
|---|---|
| الطاقة | ديزل |
| البلد (السلسلة) | بولونيا |
رافعة مساعدة |
|
|---|---|
| |
| قدرة الرفع في طرف الذراع العامل | 1.12 طن |
| نصف القطر المشغول | 3.6 أمتار |
| قدرة التحميل | 2700 كلغ |
علبة التروس ونظام نقل الحركة |
|
|---|---|
| علبة السرعة | صندوق تروس يدوي |
الحمولة بالطن |
|
|---|---|
| الوزن الإجمالي للعربة | 7 طن |
تجهيزات المقصورة |
|---|
|
معلومات إضافية Iveco 70C18 |
|---|
|
مواصفات Iveco Daily - رافعة |
|
|---|---|
| عدد الكيلومترات المقطوعة | 16 كلم |
| قيادة | مقود على اليسار |
| معايير الاتحاد الأوروبي | Iveco أورو 6 |
| سعة الخزان | 115 L |
التعليق / المحاور |
|
|---|---|
| محاور | 2×4 |
محرك |
|
|---|---|
| القوة | 176 حصان |
| سعة المحرك | 2998 سم مكعب |
أبعاد |
|
|---|---|
| سطح | 8.15 متر مربع |
| حجم | 5 متر مكعب |
تجهيزات عربة نفعية Iveco |
|
|---|---|
|
ملاحظات |
|---|
|
dump truck + crane,
brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
|
مشاهدة الجميع
|
ملاحظات |
|---|
|
dump truck + crane, brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
|
معلومات رئيسية
|
|
|---|---|
| مرجع الموقع: | 10664437 |
| هيكل العربة | عربة نفعية قلابة |
| العلامة التجارية | Iveco |
| السلسلة (العلامة التجارية : Iveco) | Daily |
| الطراز | 70C18 |
| الحالة | جديد |
| تاريخ التسجيل الأول للعربة | 16/07/2026 |
| البلد | بولونيا |
| صانع | Iveco |
حالة الأجهزة |
|
|---|---|
| الطاقة | ديزل |
| البلد (السلسلة) | بولونيا |
رافعة مساعدة |
|
|---|---|
| |
| قدرة الرفع في طرف الذراع العامل | 1.12 طن |
| نصف القطر المشغول | 3.6 أمتار |
| قدرة التحميل | 2700 كلغ |
علبة التروس ونظام نقل الحركة |
|
|---|---|
| علبة السرعة | صندوق تروس يدوي |
الحمولة بالطن |
|
|---|---|
| الوزن الإجمالي للعربة | 7 طن |
تجهيزات المقصورة |
|---|
|
معلومات إضافية Iveco 70C18 |
|---|
|
مواصفات Iveco Daily - رافعة |
|
|---|---|
| عدد الكيلومترات المقطوعة | 16 كلم |
| قيادة | مقود على اليسار |
| معايير الاتحاد الأوروبي | Iveco أورو 6 |
| سعة الخزان | 115 L |
التعليق / المحاور |
|
|---|---|
| محاور | 2×4 |
محرك |
|
|---|---|
| القوة | 176 حصان |
| سعة المحرك | 2998 سم مكعب |
أبعاد |
|
|---|---|
| سطح | 8.15 متر مربع |
| حجم | 5 متر مكعب |
تجهيزات عربة نفعية Iveco |
|
|---|---|
|
ملاحظات |
|---|
|
dump truck + crane,
brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
|
مشاهدة الجميع
|
ملاحظات |
|---|
|
dump truck + crane, brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
عربة نفعية قلابة Iveco Daily 35C13
عربة نفعية قلابة Iveco 35C13 DAILY
عربة نفعية قلابة Renault Master
عربة نفعية قلابة Iveco Daily 35C16